2021－2022年度のSPWLA Global Distinguished Speakerに選出されている手塚和彦氏によるオンライン講演が下記の要領で開催されます。
2021年12月17日(金) 6:00 ~ 7:00, 11:00 ~ 12:00 （日本時間）
DUAL-BITS CORING TOOL – NEW ROCK STRESS MEASUREMENT TECHNOLOGY APPLICABLE TO HIGH TEMPERATURE AND DEEP DEPTH
We have developed a tool to drill core samples which is recording in-situ stress information around a bottom of a borehole. When the core is cut from the bedrock, it is released from the in-situ stress and expands slightly in the radial direction. Using this principle, the in-situ stress can be determined from the elliptical shape of the core cross section (Funato & Ito, 2017). However, the difference between major and minor axes of the ellipse only provides the difference between the maximum and the minimum in-situ stress, but the magnitude of each stress component cannot be determined. This is because the core diameter d0 before expansion is unknown.
To solve this problem, we proposed the coring procedure using the “Dual core-bit tool” so that the shape before expansion is retained in part of the core. That is, after digging a groove (outer groove) in the borehole bottom by the outer core-bit, cut a smaller diameter core by the inner core-bit in a same way as a normal coring. As a result, the shape before expansion remains in the upper part of the core, and the shape should expand due to stress relief in the lower part deeper than the outer groove. According to this concept, we made a prototype of the dual core-bit tools and conducted the first field test at Kamioka mine in Gifu, Japan. This paper describes the mechanism of the tool and the results of the field test.